A solar street light with CCTV puts three jobs on one pole: a solar panel harvests sunlight, a battery stores it, an LED lights the area at night, and a camera watches and records the same scene. No grid power, no trenching for cables, no separate surveillance post. For sites where running mains is expensive or impossible — village roads, construction compounds, mining sites, farm perimeters — that single-pole design removes two installation headaches at once.
How It Works (Off-Grid, Self-Powered)
During the day the panel charges the battery (typically LiFePO4). At dusk a light sensor or timer switches on the LED. The camera runs continuously or on a trigger — motion, scheduled hours, or both — and stores footage locally (TF card) or pushes it to an app or cloud. A good MPPT controller squeezes more charge out of weak or cloudy light, so the unit keeps running through a run of bad-weather days.
Solar Street Light with CCTV vs. Two Separate Systems
| Factor | Separate solar light + standalone camera | All-in-one solar CCTV light |
|---|---|---|
| Power | Two systems; camera may still need mains or Wi-Fi | One solar battery powers both |
| Wiring | Cable runs for each; trenching likely | None — fully wireless |
| Footprint | Two poles, or a pole plus a camera post | Single pole |
| Install labor | Higher (two mounts, two configs) | Lower (one unit) |
| Failure points | Two independent systems | One integrated unit |
| Best for | Sites with existing power and network | Off-grid, remote, hard-to-wire sites |
What Specs Actually Matter
There are two halves to check: the lighting/solar half and the camera half.
Solar & lighting
- Battery: LiFePO4, roughly 2,000–3,000+ charge cycles, rated about −20 to +60 °C.
- Controller: MPPT with over-charge / over-discharge protection.
- Ingress rating: check the IP rating against the site — heavy rain, dust, or coastal air all push the requirement up.
- LED: judge by lumens and lm/W, not just the watt number.
- Autonomy: size for 3–5 cloudy/rainy days. Our current model, for reference, pairs a 70W monocrystalline panel with a 60,000mAh 3.2V LiFePO4 battery.
Camera
- Resolution: 1080P / 2MP, up to 4MP for plate or face reading at distance. Our current model is a 4MP camera — enough to make out faces and vehicle types at typical pole heights.
- Night vision: IR or full-color, with a stated range. The current model offers three night modes: full-color, infrared, and smart dual-light that switches based on human detection.
- Detection: PIR and/or human-shape AI, pushing alerts to an app. The current model supports human-shape detection and links it to the night-vision mode.
- Storage: local TF card plus optional cloud/app viewing.
- Connectivity: 4G or Wi-Fi for remote access. The current model connects over 4G (SIM card) or Wi-Fi, so it works on sites with no network cable at all.
- Two-way audio: optional on some models. The current model has dual microphones and supports two-way voice intercom from the app.
Featured Model: JDY-0566 Tri-Lens Solar Camera Light
Our current all-in-one solar street light with CCTV is the JDY-0566, a tri-lens wireless camera light built for off-grid sites. Key specifications:
- Solar panel: 70W monocrystalline
- Battery: 60,000mAh 3.2V LiFePO4
- Camera: 4MP, F2.0 aperture, PTZ supported
- Night vision: 3 modes — full-color / infrared / smart dual-light (linked to human-shape detection)
- Recording: loop recording; presets and cruise with 12 strategies; remote playback from the phone app
- Audio: dual microphones, two-way voice intercom
- Connectivity: 4G (SIM card) and Wi-Fi
- Storage: local TF card
- Protection: IP54
- Lighting: LED illumination plus supplementary light (two light options available)
Typical applications: village and community roads, plazas and parks, mountainous sites and other areas with weak grid or network coverage.
Where It Fits
- Village and community roads without reliable grid power
- Construction sites and temporary compounds
- Mining sites and remote worker camps
- Farm and perimeter security
- Parking lots, school and clinic grounds
Procurement Checklist
- [ ] Battery chemistry and cycle count?
- [ ] Camera resolution, night range, and detection type?
- [ ] Local (TF) and cloud storage options?
- [ ] 4G or Wi-Fi, and any SIM/app requirement?
- [ ] IP and IK rating for the site?
- [ ] Autonomy days for the local weather pattern?
- [ ] Warranty on battery, LED, and camera?
FAQ
Does a solar street light with CCTV need grid power?
No. The panel and battery run both the light and the camera off-grid. You only need a signal path for remote viewing — 4G or Wi-Fi — not mains power.
How does the camera record at night?
Through IR (infrared) or full-color night vision. Footage is stored on a local TF card and/or pushed to an app or cloud, depending on the model. Our model uses three night modes — full-color, infrared, and smart dual-light linked to human detection.
What camera resolution should I specify?
1080P (2MP) is the common commercial floor, with 4MP options where you need to read plates or faces at distance. Our current model is 4MP.
Can it send alerts to my phone?
With PIR or human-shape detection, yes — the unit can push a motion alert to an app. Our model does — its smart dual-light night mode is triggered by human-shape detection.
Is it harder to maintain than a normal solar light?
Slightly, because there is a camera to service, but it is still one pole and one battery. Specify a model with separate, replaceable battery and camera module to keep downtime low.
For the all-in-one model with the camera built in, see our solar street light with CCTV (MD-SLT85-JK) range.
Tell us your site and security needs — we’ll match a model and send a free quote.
